|
|
Laboratory Glasswarel
Washer LD-PLC-210
Single door version: Drop Down Door
External dimensions for: W x D x H =610 x 670
x 1200 mm
Internal usable dimensions for W x D x H =520
x 520 x500 mm
- Materials SUS 304 stainless
steel frame & SUS 304 stainless steel pipes,
- with direct water injection
into the inside of each bottle, giving "laboratory"
quality results
- Cold water supply.
|
| |
Features:
Designed to wash inside narrow necked laboratory glassware using injectors and open glassware using rotary spray arms, the plc-210 washers utilize spindle header racks allowing water, detergent and acid to be injected into inverted glassware. The wash pump and hydraulic circuit provide a high flow rate and low-pressure delivery for thorough cleaning without breakage of washed items.
|
| |
- Main Recirculation Pump
700W HORSE PUMP with a capacity of 300 l/min.
- Water Level Sensors:ONE independent sensors control chamber water level
- Electronic Thermostat :For independent selection of temperature for pre-wash, wash and final rinse between ambient and 70°C.
- Drying System
2 kW heating element and drying up to70°C.
|
| |
- Systems Control Panel
- PLC Controller with tact switch panel .
- 25-column built in printer(option)
- RS-232 output por(option)
|
