|
Laboratory
Washer LD-450UB(eco)
Designed to wash inside narrow necked laboratory glassware using injectors and open glassware using rotary spray arms, the LD-450UB washers utilize spindle header racks allowing water, detergent and acid to be injected into inverted glassware. The wash pump and hydraulic circuit provide a high flow rate and low-pressure delivery for thorough cleaning without breakage of washed items.
Single door version:
- External dimensions for: W x D x H =900 x750
x 1830 mm
- Internal usable dimensions for W x D x H =600
x 530 x630 mm
- Injection of purified water
(hot filtered air )into chamber (for drying
outside of items)
- Injection of purified water
(hot filtered air) into hydraulic circuit (for
drying inside of items)
|
|
wash system
- with direct water injection
into the inside of each bottle, giving "laboratory"
quality results.
- Cold water supply Hot water
supply Water supply Two independent sensors control chamber water level and prevent overflow .
- 2 HP with a capacity of 400 l/min
- For independent selection of temperature for pre-wash, wash and final rinse between ambient and 95°C.
- 6 kW electric heating elements provide heating up to 95°C.
|
|
Control system
- Control system
- Universal Programming controlled by microprocessor, individually selected programs available and stored in memory.
- PLC Controller with touch panal
- Drying of complete pipe system by hot air from
the hot air drying system, works simultaneously
as internal drying
- through jet systemsseparation of internal and external cleaning
- With automatic actuation when inserting jet racks.
- Air heating and filter system
- 4 kW electric heating element for evaporative drying up to 110°C.
|
|
Dosing system
back to home |